What is the difference between vacuum inflatable packaging machine and body packing machine
Hits£º551 Date£º2021/4/2
The body fitted packaging machine is a packaging machine that places the goods on the cardboard or bubble cloth, heats up the body fitted film, closes the goods under the vacuum effect, and seals with the bottom plate. It is the same as the vacuum inflatable packaging machine, which must use the function of the vacuum pump to carry out the packaging work. Next, let's introduce the difference between the vacuum inflatable packaging machine and the body fitted packaging machine.
1. Packaging products are different:
Like double chamber vacuum pump packaging machine or external vacuum pump packaging machine, the packaging products are all vacuum packaging bags, while the packaging material bags of body fitted vacuum pump packaging machine are PE film and roll film materials. It is very easy to distinguish after packaging.
2. The principle is different
Generally, the vacuum inflatable packaging machine is bonded together according to the seal, while the body fitted vacuum inflatable packaging machine is broken according to the resistance wire. There is only one personal working room for the double chamber vacuum inflatable packaging machine, while the body fitted vacuum inflatable packaging machine is divided into two vacuum chambers according to the body fitted film. According to the standard air pressure difference of the two vacuum chambers, the film is fitted to the body.
3. The price of vacuum pump packaging machine is different
Because the production process of the body fitted vacuum pump packaging machine is very complex and the product cost is high, the price of the body fitted vacuum packaging bag is slightly higher than that of the general vacuum pump packaging machine.
Replacement of heating strip of vacuum inflatable packaging machine
1. If the adhesive tape on the heating device is damaged, it should be removed and replaced, and a total of two layers can be pasted.
2. Loosen the fixed card of the vacuum inflatable packaging machine, remove the protective cloth, remove the screw, pull out the electric heating rod, fix the pin, and remove the electric heating rod.
3. Remove the broken heating strip of the vacuum inflatable packaging machine, remove the air oxide layer with fixed terminal, insert one end of the new heating strip into the slot of the terminal, rotate it for one week, fix it on the fixed block of the insulating layer, just as the other end is fixed on another fixed block, tighten the heating strip.
1. Packaging products are different:
Like double chamber vacuum pump packaging machine or external vacuum pump packaging machine, the packaging products are all vacuum packaging bags, while the packaging material bags of body fitted vacuum pump packaging machine are PE film and roll film materials. It is very easy to distinguish after packaging.
2. The principle is different
Generally, the vacuum inflatable packaging machine is bonded together according to the seal, while the body fitted vacuum inflatable packaging machine is broken according to the resistance wire. There is only one personal working room for the double chamber vacuum inflatable packaging machine, while the body fitted vacuum inflatable packaging machine is divided into two vacuum chambers according to the body fitted film. According to the standard air pressure difference of the two vacuum chambers, the film is fitted to the body.
3. The price of vacuum pump packaging machine is different
Because the production process of the body fitted vacuum pump packaging machine is very complex and the product cost is high, the price of the body fitted vacuum packaging bag is slightly higher than that of the general vacuum pump packaging machine.
Replacement of heating strip of vacuum inflatable packaging machine
1. If the adhesive tape on the heating device is damaged, it should be removed and replaced, and a total of two layers can be pasted.
2. Loosen the fixed card of the vacuum inflatable packaging machine, remove the protective cloth, remove the screw, pull out the electric heating rod, fix the pin, and remove the electric heating rod.
3. Remove the broken heating strip of the vacuum inflatable packaging machine, remove the air oxide layer with fixed terminal, insert one end of the new heating strip into the slot of the terminal, rotate it for one week, fix it on the fixed block of the insulating layer, just as the other end is fixed on another fixed block, tighten the heating strip.
On a message£ºHow does vacuum packaging machine keep fresh Next information£ºWhat maintenance skills does vacuum inflatable packaging machine have
